HP DesignJet collects practical CAD plotting guidance for this topic within Printers & Plotters. Use these articles for setup, verification, troubleshooting and reliable final output.
The HP DesignJet T1600 class is a higher-throughput 36-inch technical plotter aimed at CAD/GIS workgroups. AutoCAD setup should separate the drawing standard from advanced device features such as dual-roll or PostScript/PDF processing.
The HP DesignJet T1700 is a 44-inch workgroup technical-plotter family with single-roll, dual-roll and PostScript variants. In AutoCAD, its extra width and device processing options increase the importance of controlled Page Setups and media mapping.
Set up an HP DesignJet in AutoCAD by proving the operating-system printer first, selecting the exact device in Page Setup, choosing the real roll/paper size, and only then saving a PC3 if you need AutoCAD-specific overrides.
Most HP DesignJet problems that appear suddenly after a Windows, driver or workstation change are not drawing problems. Use a device-first diagnostic path before touching viewport scale or title blocks.
Roll-fed CAD plotting becomes reliable when the office separates roll width, cut length, media source and AutoCAD paper size instead of treating ‘roll paper’ as one setting.
Nominal paper size and physical printable area are not the same thing on an HP DesignJet. This guide connects the HP driver media definition to AutoCAD’s Layout boundary and title-block margins.
When a large CAD drawing plots partially, distorts or fails only on a physical DesignJet, isolate drawing complexity, raster/transparency load, driver state and device memory before redesigning the Layout.
HP DesignJet covers everything from compact 24-inch technical plotters to high-volume 36- and 44-inch workgroup devices. The important AutoCAD skill is not memorizing model numbers; it is understanding the driver, media and Page Setup workflow that stays consistent across families.
The HP DesignJet T200 family is a compact 24-inch technical-plotter class aimed at home and small-office CAD work. Its AutoCAD setup is simple when the Layout, roll width and driver are treated as separate layers.