All AutoCAD Lines Plot the Same Thickness: How to Fix It
Restore thin/medium/heavy distinction when plotted hierarchy collapses. Lineweight is a paper-output property, so the final proof is Plot Preview, PDF and—when important—the actual printer or plotter, not only the AutoCAD canvas.
Start here — what you are going to do
Your goal: Restore thin/medium/heavy distinction when plotted hierarchy collapses.
Where to start: Open a Layout and a known sample where plotted thickness can be compared clearly.
Beginner rule: Change one lineweight-related control at a time and keep a known-good calibration output for comparison.
Step by step — follow this in AutoCAD
Step 1 — Choose a known sample
Where: Select one thin and/or heavy object or use a calibration drawing.
Do this: Read its layer, object lineweight, color and plot-style assignment.
Check: The intended source properties are known.
Step 2 — Identify CTB or STB behavior
Where: PSTYLEMODE > PAGESETUP > Plot Style Table.
Do this: Determine whether the selected table forces a lineweight or uses the object/layer value.
Check: The plotting hierarchy is clear.
Step 3 — Check Page Setup plot options
Where: PAGESETUP > Modify > Plot Options.
Do this: Review Plot Object Lineweights, Plot with Plot Styles and Scale Lineweights as they apply to the office workflow.
Check: Shared output options are known.
Step 4 — Compare one thin sample with one heavy sample
Where: Layer Properties / object Properties / CTB-STB editor / Page Setup.
Do this: Pick two objects that should be clearly different, compare layer/object properties, CTB/STB mapping and Page Setup options, then correct the common cause.
Check: The intended lineweight control is corrected or understood.
Step 5 — Preview a labeled calibration sample
Where: Ctrl+P > Preview.
Do this: Compare known values such as 0.13, 0.25, 0.35 and 0.50 mm.
Check: The graphical hierarchy is visible.
Step 6 — Verify final output
Where: Plot PDF and, if required, one physical sample.
Do this: Compare with the known-good lineweight reference.
Check: The change is proven at output scale.
Beginner example
If 0.13 mm and 0.50 mm samples plot identically, use that pair to isolate whether the table or source properties are flattening them.
Understand what AutoCAD is doing
Several controls can contribute to plotted thickness
Layer/object lineweight, CTB/STB mapping and Page Setup options must be read together.
Screen display is not the final standard
LWDISPLAY and zoom affect what lineweight looks like while drafting.
A calibration sheet removes guesswork
Labeled samples let the team compare actual plotted thickness after CTB/STB, driver or plotter changes.
Useful next guides: AutoCAD Lineweights Not Plotting: Causes and Fixes · CTB Lineweight Mapping · Apply a Named Plot Style in an STB Drawing · Plot Object Lineweights · Lineweights
Common problems and what to check first
| What you see | What may be causing it | Check this first |
|---|---|---|
| All lines look the same | Shared plot-style/Page Setup setting is flattening the hierarchy | Compare two known thin/heavy samples. |
| PDF is correct but paper is wrong | Printer/driver/media stage differs | Do not change CAD lineweights until the hardware stage is tested. |
| Only one color/style is wrong | CTB row or STB named style differs | Inspect the specific mapping. |
| Only screen looks wrong | Display visualization differs from plotting | Judge Preview/PDF instead of LWDISPLAY alone. |
When you need a more repeatable workflow
Keep a lineweight calibration sheet and reference output for the office standard. Whenever CTB/STB, Page Setup, PC3, driver or plotter changes, rerun the same test before approving production output.
Official Autodesk references
Interface labels can vary slightly by AutoCAD release, workspace and installed output devices. These Autodesk resources are the primary references for the workflow above.
Frequently asked questions
Should I fix a lineweight problem by changing drawing scale?
No. Viewport/plot scale and paper lineweight are separate controls.
Can CTB/STB override object lineweight?
Yes when the selected plot style defines another lineweight; document your office hierarchy.
What is the best QA tool?
A reusable lineweight calibration drawing and reference PDF/plot.
Explore more in AutoCAD Lineweights & Plot Thickness Guide.